Cable Clamp Fitting Distribution Single Top Ties for Insulator
Technical data sheet:
Model |
Outer diameter (mm) |
Color code |
Approximate length (mm) |
C Neck (Φ57mm) |
F Neck (Φ73mm) |
J neck(Φ89mm) |
Min |
Max |
C Neck |
F Neck |
J neck |
14.3mm minimum groove radius |
SDB-57-5460 |
SDB-73-5460 |
SDB-89-5460 |
4.83 |
5.46 |
Blue |
610 |
635 |
660 |
SDB-57-6200 |
SDB-73-6200 |
SDB-89-6200 |
5.49 |
6.20 |
Brown |
635 |
660 |
685 |
SDB-57-7040 |
SDB-73-7040 |
SDB-89-7040 |
6.22 |
7.04 |
Orange |
660 |
685 |
710 |
SDB-57-8000 |
SDB-73-8000 |
SDB-89-8000 |
7.06 |
8.00 |
Purple |
660 |
735 |
760 |
SDB-57-9070 |
SDB-73-9070 |
SDB-89-9070 |
8.03 |
9.07 |
Red |
710 |
785 |
815 |
SDB-57-1029 |
SDB-73-1029 |
SDB-89-1029 |
9.09 |
10.29 |
Yellow |
760 |
815 |
840 |
SDB-57-1166 |
SDB-73-1166 |
SDB-89-1166 |
10.31 |
11.66 |
Blue |
635 |
660 |
685 |
SDB-57-1321 |
SDB-73-1321 |
SDB-89-1321 |
11.68 |
13.21 |
Orange |
635 |
685 |
710 |
SDB-57-1494 |
SDB-73-1494 |
SDB-89-1494 |
13.23 |
14.94 |
Red |
710 |
735 |
760 |
SDB-57-1689 |
SDB-73-1689 |
SDB-89-1689 |
14.96 |
16.89 |
Purple |
760 |
815 |
840 |
SDB-57-1918 |
SDB-73-1918 |
SDB-89-1918 |
16.92 |
19.18 |
Brown |
785 |
815 |
840 |
SDB-57-2172 |
SDB-73-2172 |
SDB-89-2172 |
19.20 |
21.72 |
Red |
815 |
840 |
865 |
15.9mm minimum groove radius |
SDB-57-2459 |
SDB-73-2459 |
SDB-89-2459 |
21.74 |
24.59 |
Blue |
865 |
890 |
915 |
19.1mm minimum groove radius |
SDB-57-2784 |
SDB-73-2784 |
SDB-89-2784 |
24.61 |
27.84 |
Green |
940 |
965 |
990 |
SDB-57-3150 |
SDB-73-3150 |
SDB-89-3150 |
27.86 |
31.50 |
Yellow |
1015 |
1040 |
1065 |
Description:
Single line/top ties are intended for securing bare conductors into the top groove of insulators. On vertically-mounted insulators, single line ties/ top ties can normally accommodate line angels of up to 10 depending on insulator orientation.
Material: Aluminum-clad steel with an elastomer pad
Mechanical: Single line ties/top ties will develop unbalanced and lift-off loads equivalent to , or in excess of, a hand tie over covered conductor. When installed with a pad on bare conductor, single line ties/top ties provide superior protection against abrasion and all types of conductor motion. The pad is a resilient cushion at the point of contact between conductor and insulator.
Insulators: Φ57mm (C Neck), Φ73mm (F neck) and Φ89mm (J neck)
Applicable conductor: ACSR, All-Aluminum, Aluminum Alloy and etc ..
Company Profile
POWTECH is a high-tech enterprise who specialzes in manfuacturing electric transmission, distribution and telecom line materials like: ABC clamp, piercing insulation connector, insulators, surge arresters, dropout fuse, isolation switch, preformed guy grips, stainless steel banding, FTTH fittings, PLC splitter, patch cord, cross arm, stay wire and all transmission line fittings. Since our establishment in 1994, we dedicated ourselves to serve our partner with one-stop service, professional service, quality product, factory acceptance test, installation training, onsite guide and many value-added services.
After more than 20years' development, we are certified by ISO9001, ISO14001, SGS, FCC, CE, RoHS and by customer-appointed lab test suthorities etc.
With the belief, there's no small or big customer, every customer deserve good srevice. We are willing to support all of our customers grow and prosper.