Optical fibet Fushion Splicer
Description:
FS1030 Fiber Optic Fusion Splicer adopts a brand new design. Its powerful function and pretty low insertion loss fully satisfies the requirements for fiber splicing of the backbone and FTTx. The lightweight body and exquisite design save working space. With new fiber imagery system and pure digital design, image display is more delicate and clearer. Real-time embedded operation system provides user-friendly operation interface and more useful functions; Built-in high capacity Li-on battery supports long time operation in field; Real-time match system for humidity and air pressure makes it flexibly adapt the changing environment and obtain low insertion loss after splicing in harsh environment.
Features:
· Compact and full digital design
· Light weight (2.8Kg, including battery) and small volume
· High efficiency: 8 seconds for splicing, and 30 seconds for heating
· Three splicing mode: Auto, half-auto, manual
· Automatic splicing after closing the windshield, automatic heating after closing the heating cover
· Real-time discharging correction system, and need no adjustment of the parameters
· Simultaneously view of X and Y, 304x fiber magnification
· Real-time discharge calibration system
· Long lifetime of the electrodes: 4000 times
· Support USB and VGA interface
· One button operation to finish results download or software update
· 5.7 inch high definition LCD monitor provides clearer image display
· Battery capacity displayed on screen in real-time, precisely
· Built-in high capacity Li-on battery supports 220 times splicing and heating
· Built-in super high-brightness LED, convenience for night work
· New wind-cover design, enhance the ability to prevent the dust & wind, Max. Wind velocity of 15m/s
Technical Highlights:
· HD optical image acquisition system
· HD aligner for double separate optical fibers
· High performance CMOS sensor
· Sensor pixels 640*480
Len Imaging Optical Fiber Aligning System
· Fast evaluation of fiber profile
· Precise fiber alignment
· Precise evaluation of splicing loss
Real-time Discharging Correction System
· High performance discharging electrode
· AC-DC mix discharging technique
· Current feedback and environment compensation
| Parameters |
Specifications |
| Align Mode |
Advanced profile alignment system(PAS) |
| Operation Mode |
Auto, Half auto, Manual |
| Fiber Types |
Single mode (ITU-T G.652)
Multimode (ITU-T G.651)
Dispersion shifted (ITU-T G.653)
Non-zero dispersion shifted (ITU-T G.655)
Other SMF including ITU-T G657 fibers |
| Average Splicing Loss |
0.02dB with SM
0.01dB with MM
0.04dB with DS and NZDS |
| Return Loss (dB) |
≥60 |
| Fiber Diameter |
Cladding diameter: 80µm ~ 150µm
Coating diameter: 100µm ~ 1000µm |
| Fiber Cleave Length |
8 ~ 16mm (coating diameter <250µm)
16mm(coating diameter 250 ~ 1000µm) |
| Splicing Time (s) |
8 (Typical splicing time) |
| Heating Time (s) |
30 (Typical heating time) |
| Data Transmission |
USB port &VGA |
| Heater |
Auto Heat Mode, the typical heating time is 30 seconds |
| Heat-Shrinkable Tube |
40mm, 60mm and a series of micro Heat-Shrinkable Tubing |
| Screen Display |
5.7 inch 640*480 LCD, core of the fiber is clearly visible |
| Backlight |
Built-in super High-brightness LED supply convenience for night work |
| Magnifications |
Vertical 152times, horizontal 304times |
| General Specifications |
| Power Supply |
Alternating Current:100-240 50Hz/60Hz 30W, Direct current:13.5V/4.5A Built in 11.1VLi-ion battery charger and AC adaptor |
| Battery Life |
Support 220 times splicing and heating on one charge (3.5hours) at least |
| Battery Lifetime |
Cycle life up to 300 ~ 500 times, replaceable |
| Tension Test (N) |
2 |
| Electrode Lifetime |
>4000 times, replaceable |
| Operating Temp. (°C) |
-10 ~ 50 |
| Relative Humidity |
0 to 95% (40 °C, non-condensing) |
| Work Altitude (m) |
0 ~ 5000 |
| Instrument Weight (kg) |
2.3 (no battery )
2.8 (including battery) |
| Dimensions (mm) |
160Lx 150W x 140H |
FAQ
Q1:Can u provide us with samples?
Powtech answer:Yes, we can provide 1-2 pieces free samples, But u should pay express
cost or u provide us with express account number.
Q2:If we need customized/OEM product,Can u supply?
Powtech answer:Yes,Customized/OEM product/artwork is available for us.Professional
designers,Advanced technicians and mold modifications department ensure that we will make
the exact model for u accordingly.
Q3:If u can accept small trial order?
Powtech answer:Yes,Small trial order can be available also,But u should pay 100% T/T down
payment before production.
Q4:What payment terms available for u?
Powtech answer:If order amount less than 10000USD,100% T/T;If amount more than
10000USD,30%T/T in advance plus 70%T/T before shipment.
U can place an order via Alibaba website,Which is also very safe
and has payment protection for u.
Q5:Can u offer discount ?
Powtech answer:Yes,Discount available on large order.The larger the order,The more
discount we will offer.
Q6:What is ur delivery time?
Powtech answer:Usually,Delivery will be made within 2 weeks after down payment;If order very
large,1 month we will need.Please note,Delivery time is production time,Shipping time not
included,If u want to know,We can help u consult shipping company for details.
Audited Supplier 
){kind=link}
){kind=link}